Author: Linda Wray

Roofing Maintenance Tips for Homeowners

Keeping up with a residential roof maintenance program helps prevent costly repairs down the road. Using a contractor for annual inspections, cleaning, and repairs is the best way to maximize your roof’s lifespan.


Roofing Columbus GA maintenance includes checking for caulk seams around chimneys and vent pipes, addressing any blisters, and removing moss. It also includes ensuring gutters are free of blockages, which can cause water damage.

Flashing is a strip of impervious material, typically metal, installed in the joints and penetrations of a roof. It prevents water from seeping under the shingles and into the structure. Flashing also helps the roof and walls expand and contract in response to temperature changes without cracking.

Typically, flashing is found where two slopes of the roof meet or where a penetration through the roof occurs, such as a chimney, vent pipe, or skylight. Flashing can be made of a single piece that wraps around the penetration and is then covered with shingles, or it can consist of multiple square pieces, one lapping another, to function as a single surface. It is important to choose the right flashing material for your roofing system at the outset, as improper or cheap materials can result in premature roof deterioration.

If flashing is not correctly installed during the initial roof installation, it can become loose or cracked over time, especially in areas of the roof that experience a lot of foot traffic. It is also possible for flashing to be completely removed from your roof. If you suspect that your flashing is not doing its job, check for signs of leaks or water infiltration through the roof, such as a rusty color, pitted spots, and missing beads. You can also examine your roof’s caulking, which serves as a secondary seal against water, for peeling or cracking.

Leaks tend to gather in valleys, which are areas where two different slopes of the roof intersect. The gushing stream of water at these intersections is a prime area for leakage. Roof flashing is often found in these areas, and it functions to cover the seams between the two separate slopes and to channel the water toward the gutters and away from the house.

Flashing is also used to protect the openings of pipes or vents that protrude from the roof, such as those for wood stoves, gas furnaces, and plumbing vents. This type of flashing consists of a square piece of metal with a central spout opening, either made from metal for a vent pipe or with a rubber compression fitting to wrap around a PVC or similar thin pipe.


Caulking is an important aspect of a roof’s maintenance. It seals cracks and gaps to help keep moisture out of the house and prevent heat loss around windows and doors. It also helps prevent water leaks around bathtubs, sinks, and toilets, as well as cracks in the foundation or driveway. In addition, caulking can provide an attractive and cosmetic touch to many areas of the home.

There are a variety of caulking products available for different applications, including silicone, acrylic latex, and polyurethane. Each product has its own set of advantages and disadvantages. It’s important to read the product labels carefully to determine which type is best for your needs.

For example, silicone caulk is better suited for high-moisture environments than acrylic latex caulk. It is also better at resisting mildew than acrylic latex, which is more prone to mold growth. However, silicone caulk is typically more difficult to use because it is less flexible than acrylic latex. Therefore, it’s important to practice on a piece of cardboard or scrap wood before applying silicone caulk to your home.

Acrylic latex caulk, on the other hand, is more versatile and easy to work with than silicone. It’s also cheaper than silicone, and it can be painted over with any paint color. It’s important to use a caulking gun for this task, and it can be helpful to cut the tip of the tube at an angle to make it easier to follow the contour of the application area.

Before applying caulking, it’s important to remove any dust or dirt from the surface. Then, you can apply a thin bead of caulk along the gap. After applying the caulk, it’s important to smooth out the line with your finger. Finally, it’s important to let the caulk dry before using the area.

Roofing professionals recommend caulking to protect the integrity of the roof and avoid potential damage from leaks, wind, and rain. However, it’s important to understand that caulking should only be used as a temporary solution to fix small leaks or where you can’t use flashing to create a waterproof seal. Also, some older caulking compounds contain PCBs, which can cause health problems if ingested or inhaled.

Trimming tree branches

Trees are a beautiful part of any yard, but they can also cause damage to your roof if they’re not properly maintained. Trimming the branches that overhang your home is an important part of roofing maintenance to keep them from rubbing against or dropping debris on your roof, which can cause shingle damage, leaks, and other problems that require costly roofing repairs.

Overhanging tree branches can also become a hazard during harsh weather conditions, such as heavy rains or winds, and can break off or fall on the roof. This can lead to significant damage to the shingles, gutters, and structure of your home, as well as pose safety risks for your family and guests.

It’s recommended to have the trees around your house trimmed twice a year, or at least once every other year, to maintain proper health. However, it’s important to hire a professional tree service for this task to ensure the job is done correctly and safely. The expert should prune the outer branches of your trees, removing any that are sticking out from the roof or overhanging it, as well as any that are dying or dead. It’s also a good idea to remove any branches that are growing inward toward the center of the tree, as these branches are not healthy.

In addition to preventing damage to your roof, regular tree trimming can also prevent pests and animals from accessing your roof. If branches hang over your roof, they can provide easy access for squirrels, raccoons, birds, and other critters, which can cause structural damage to the roof or infiltrate the attic.

It’s important to cut only those branches that pose a risk to your roof, and always make the first cut outside of the branch collar, which is the swollen area where the branch meets the trunk of the tree. Then, make a cut about 1/4 inch above the bud and angle it at a 45-degree angle to minimize disease and water damage. If the branch is too thick to cut with hand tools, it may need to be removed completely by a professional.

Moss Removal

Moss growth is one of the most common roofing problems. It can cause leaks and add weight to your roof, which is not good for the shingles. It also holds moisture on the shingles, which can lead to rot and a shorter life span for your roof. It can also create a slipping hazard for anyone who is walking on your roof or near it.

If you have a shingle roof with a small amount of moss growing on it, you can remove it manually or by using a chemical spray. The best time to do this is during the summer, when moss goes dormant and becomes more brittle. It’s important that you use a proper ladder and be careful when working on the roof.

There are several commercial products that can be purchased to kill the moss, which can then be washed away with a garden hose or pressure washer. Most of these products contain ingredients that are safer for plants and are less likely to damage shingles than homemade solutions. When using a commercial product, make sure that you follow all the safety instructions for application.

In addition to these products, there are a few other things you can do to keep moss from growing on your roof. For example, trim any trees that are overhanging and shading your roof, and clean the gutters regularly. These steps will allow more light, warmth, and air to reach your roof, which discourages moss growth. It’s also a good idea to periodically remove smaller patches of moss from your roof as they appear.

If you do decide to hire someone to kill and remove moss from your roof, it’s important that they follow all the safety instructions. In particular, they should not spray the moss with water or power wash it to avoid damaging the shingles.

It’s important that you take care of a moss problem as soon as it appears on your roof. The longer you wait, the more difficult and expensive it will be to control it. Having a professional take care of it now can save you money in the long run and help extend the life of your roof.

Buying FedEx Routes As an Independent Contractor

Owning multiple FedEx Routes can help your business grow. Typically, the number of routes you can handle as a sole owner is five. However, you can purchase more than five. Owning more than five can be difficult, and handling the increased responsibilities can be more challenging. Therefore, owning more than five routes is not recommended, as you will be responsible for more trucks and drivers. Fortunately, there are some ways to reduce the workload and maximize profit. 

When it comes to buying a FedEx route, you need to be aware of the requirements. Unlike other types of business, independent contractors are not eligible for FedEx benefits. Moreover, you will be responsible for insurance, employee retention, and other expenses that you will have to handle. If you’re interested in purchasing a route, you need to establish a corporation, a legal requirement for an independent contractor. You’ll also need to sign a contract with the company so that you can avoid early withdrawal penalties.

A FedEx route is a contract, which means you may have to make monthly payments to FedEx. This means that you may have to pay for these services over a long time. If you have extensive experience in the business, you can hire a lawyer to help you set up a corporation and comply with all of the requirements. Even though this is a contract job, you’ll still need to meet ISP requirements and hire qualified drivers. You can also hire a professional to help you set up your fleet.

The best way to find out which route is correct for you is to ride it before buying it. You don’t need to be an expert in logistics or shipping to own a FedEx route, but a little experience in trucking and logistics is a plus. After that, you’ll need to perform a background check and evaluate your experience. Nevertheless, you must pass these tests to qualify as a route owner.

Before you buy a FedEx route, you should do due diligence. You should take into account the cost and age of the fleet. You should also compare the number of employees and other factors with industry standards. If you have contacts in the logistics or shipping industry, you can ask these people if they know any routes that are up for sale. Once you’ve made up your mind, you can start comparing FedEx routes to other businesses.

FedEx routes are suitable for beginners and experienced investors. The profits are endless and depend on your work ethic. As a sole owner of a FedEx route, you’ll own the vehicle and earn profits from it as you go. As long as you follow all rules, you’ll have a successful business. Just make sure to keep these tips in mind. Then you’ll be on your way to success. You’ll be happy you did.

While buying a single FedEx route might be a great way to make money, the risks are numerous and can quickly overwhelm your team. So it would be best if you were sure to invest in a company that’s experienced and has a stable management team. If you’re able to train the route owner properly, you’ll be able to run it without a problem. But if you want to expand beyond the first few routes, it’s a wiser move to hire a professional.

Purchasing a FedEx route is an excellent opportunity for those looking for a sideline business. Although the costs of owning a route are high, they are well worth the investment. Most of these businesses require at least $1 million to start. If you don’t have this kind of capital, you can purchase a route with a partner. A FedEx route will be more expensive than a normal one, but it’s a great way to make extra money.

Aside from paying a down payment, you can negotiate the price of the route. A broker will help you negotiate the price and the equipment. A broker will help you find the correct route. By working with a broker, you can get a detailed description of all the FedEx routes available for purchase. This will help you decide which route to buying. It is essential to understand the different costs involved in buying a route. This will help you determine the value of your FedEx routes.